Showing posts with label skylight array. Show all posts
Showing posts with label skylight array. Show all posts

Thursday, May 31, 2018

Case Study: Goodbye Leaky Skylights


Late last year Naturalight Solar, Inc. completed a large skylight replacement job in Novato. There were two old 2x9 skylights that were failing, causing leaking that resulted in water damage. Due to the large size of the existing skylights, Naturalight ordered custom curb adaptors so that new, standard size VELUX skylights could be installed. 

Old, leaking skylight arrays.
Interior water damage from leaking skylights. 
Visible cracks in the old skylights.


Naturalight removed the existing skylights and stripped down the old, damaged material to the base, from which we started fresh. Layer by layer, we installed the new skylights. Underlayment, metal flashings, shingles, curb adaptors, and finally, new VELUX Skylights. 

Stripped down to the base. 

New shingles going on over the underlayment. 

Metal flashings installed. 

Thybar Curb Adaptors in place and awaiting the new VELUX skylights. 


The two curb adaptors held three VELUX Skylights each, two of which were solar operable skylights. The addition of the solar operable skylights made the entire project eligible for a 30% Federal Solar Tax Credit, which resulted in a $5,000 credit for the homeowner. 


The completed VELUX Skylight arrays.
The VELUX Solar Operable skylight flanked by two VELUX fixed skylights. 




Monday, January 29, 2018

Case Study: Soaring Skylights

This month, Naturalight Solar completed a project on a home in Napa that is under-going a complete remodel. We worked alongside the projects general contractor, Briant Frye of Frye Built Construction.

In this two-story home, we replaced one old plastic bubble skylight with a new VELUX glass 2x4 fixed skylight as well as installing a brand new skylight array in a curb adaptor over the great room where they will bring in lots of wonderful sunlight.


The nature of the project required a crane to lift the huge 8x8 foot curb adaptor into place where Frye had already made the cut-out in the roof. The crane was also used to bring up the four skylights that fit in the curb adaptor and the one replacement skylight.

    

The homeowner chose two VELUX fixed 4x4 curb mount skylights and two VELUX solar operable Fresh Air 4x4 skylights to go into the curb adaptor, creating a perfect system for natural light and ventilation. With the solar operable skylights at the highest point of the home, they will create a chimney effect when open to draw out stale, warm air and replace it with fresh air.

  



The homeowner decided on the black metal curb adaptor to match the unusual black metal roof that will be installed later. With the stunning backdrop of the Napa hills, we can’t wait to see photos of the finished home in a few months!